Precautions for use of spray bar spray in spring
Release time:
Feb 07,2025
It is currently the spring plowing season, and various agricultural machinery have been put into production operations.
It is currently the spring plowing season, and various agricultural machinery have been put into production operations. In order to reduce the use of agricultural machinery failures, improve operational efficiency, and ensure safe production, the following are the precautions for using agricultural machinery in spring:
All types of agricultural machinery should be cleaned according to the instructions before use. Regularly lubricate, adjust, tighten and other tasks, especially the tire fixing bolts, to ensure that the equipment is put into operation in good technical condition.
For the maintenance of the lubrication system of power machinery, in addition to using lubricating oil according to the prescribed standards, it is also necessary to strictly follow the maintenance cycle and specifications of the lubrication system, regularly clean the lubrication system, and replace the filter components regularly to reduce the wear and tear of the parts.
Pay attention to keeping the front and rear wheels in a straight line.
The temperature changes greatly in early spring, and the correct use of the cooling system for power machinery cannot be ignored. Firstly, it is necessary to continue to do a good job of antifreeze work. When the temperature is below zero at night, check the antifreeze in a timely manner to avoid freezing and cracking the machine body; Secondly, when starting the machine at low temperatures, preheating should be implemented; Thirdly, attention should be paid to the normal operating temperature of the engine, and load operation can only begin after warm-up.
When carrying out fertilization and pesticide application operations, it is necessary to strictly follow the operating procedures to ensure safe production. Our company's engines are all diesel engines, so the purification of diesel is very important. Diesel purification requires settling the diesel for at least 96 hours, adding a filter to the funnel during refueling, and adding a layer of silk cloth. When taking oil from the oil drum, wrap the filter with a layer of silk cloth and regularly clean or replace it.
keywords
Previous Page:
:Next Page
Previous Page:
Next Page: